Hello, i'm trying to build a mini NAS home server with the following specs (mainly from Aliexpress):
I installed the TrueNAS CORE 13.0-U6.1 first with BIOS boot option. But it didn't book.
I reinstalled using the UEFI boot option. Now it boots but rebooted several times with several errors.
Now it is stuck in this part:
After couple seconds it reboots again.
Any idea what could be the problem?
I already tried to reinstall, but with same issue.
- Motherboard BKHD-N5105-NAS-I22X (https://www.bkipc.com/en/product/BK-NAS-N510X-MB.html?spm=a2g0o.detail.1000023.1.17ccfxiNfxiNZp)
- CPU Intel Celeron N5105 (integrated in the motherboard)
- RAM quantity 16GB - 2X DDR4 8GB 3200MHz (non ECC)
- Hard drives:
- OS/boot: SSD WD Green SN350 240GB Nvme M2
- Storage: Seagate 8TB IronWolf, NAS, 7200 RPM, Cachê 256MB, SATA 3 - ST8000VN004
I installed the TrueNAS CORE 13.0-U6.1 first with BIOS boot option. But it didn't book.
I reinstalled using the UEFI boot option. Now it boots but rebooted several times with several errors.
Now it is stuck in this part:
Code:
Syncing multipaths... Error: vmware-checkvm must be run inside a virtual machine on a VMware hypervisior product Error: vmware-checkvm must be run inside a virtual machine on a VMware hypervisior product Starting interface...
After couple seconds it reboots again.
Any idea what could be the problem?
I already tried to reinstall, but with same issue.