Just recently purchased a SuperMicro SYS 4048B-TRFT Following are the specs:
Supermicro 4U 24x 3.5in Drive Bays
Server Chassis/ Case: SYS-8048B-TRFT
Motherboard: X10QBI Ver 1.01
Backplane: BPN-SAS3-846EL1 24-port 4U SAS3 12Gbps
PCI-Expansions slots: 8x PCI-E 3.0 slots w/ 96 memory slots
CPU: 4x E7-4850V2 2.30GHz 12C
Memory: 1TB DDR3 ECC
Hard Drives: 24x 4TB SAS-3 7.2k 12GBs
Controller: 1x AOC-S3008L-L8E HBA Controller JBOD Mode
NIC: 1x AOM-X10QBI-A Add-on Module support 1x VGA, Dual 10GBase-T
ports X540
Caddies: 24x 3.5" Supermicro caddy
Power Supplies: 4x 1620 W Power supply
2x intel 910 series SSD
It is currently up and running Truenas SCALE Bluefin. However neither the BIOS nor SCALE recognize the 2 Intel 910's
I have access to the BMC so I can get into the machine remotely (I also have physical access to the server)
I did some research and it appears that in order for the drives to be recognized by the BIOS and or the OS it needs drivers installed. I have the correct drivers for Debian.
My question: What is the process for making these PCIe based SSD cards visible to either the OS? Step by step guide would be most helpful but at this point I will take whatever advice I am given that allows the drives to be seen by the OS
Supermicro 4U 24x 3.5in Drive Bays
Server Chassis/ Case: SYS-8048B-TRFT
Motherboard: X10QBI Ver 1.01
Backplane: BPN-SAS3-846EL1 24-port 4U SAS3 12Gbps
PCI-Expansions slots: 8x PCI-E 3.0 slots w/ 96 memory slots
CPU: 4x E7-4850V2 2.30GHz 12C
Memory: 1TB DDR3 ECC
Hard Drives: 24x 4TB SAS-3 7.2k 12GBs
Controller: 1x AOC-S3008L-L8E HBA Controller JBOD Mode
NIC: 1x AOM-X10QBI-A Add-on Module support 1x VGA, Dual 10GBase-T
ports X540
Caddies: 24x 3.5" Supermicro caddy
Power Supplies: 4x 1620 W Power supply
2x intel 910 series SSD
It is currently up and running Truenas SCALE Bluefin. However neither the BIOS nor SCALE recognize the 2 Intel 910's
I have access to the BMC so I can get into the machine remotely (I also have physical access to the server)
I did some research and it appears that in order for the drives to be recognized by the BIOS and or the OS it needs drivers installed. I have the correct drivers for Debian.
My question: What is the process for making these PCIe based SSD cards visible to either the OS? Step by step guide would be most helpful but at this point I will take whatever advice I am given that allows the drives to be seen by the OS