I'm very new to TrueNAS
The specs for the computer I'm trying to use
Studio XPS 9100 Intel Core i7- 930 processor(8MB L2 Cache, 2. 80GHz)
Nvidia GeForce GTS450
8GB DDR3 SDRAM at 1333MHz
I did a fresh install of scale and when I try to create a pool there is no disk available to create the pool with. Only the boot drive shows up
when I type zpool status this is what I get
admin@truenas[~]$ sudo zpool status
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
[sudo] password for admin:
pool: boot-pool
state: ONLINE
status: Some supported and requested features are not enabled on the pool.
The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
config:
NAME STATE READ WRITE CKSUM
boot-pool ONLINE 0 0 0
sdd3 ONLINE 0 0 0
errors: No known data errors
when I type lsblk I get
admin@truenas[~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 3.6T 0 disk
sdb 8:16 0 3.6T 0 disk
sdc 8:32 0 931.5G 0 disk
sdd 8:48 0 931.5G 0 disk
├─sdd1 8:49 0 1M 0 part
├─sdd2 8:50 0 512M 0 part
├─sdd3 8:51 0 915G 0 part
└─sdd4 8:52 0 16G 0 part
└─sdd4 253:0 0 16G 0 crypt [SWAP]
I don't know how to make the drives show in storage dashboard I was able to import and get this but I still can't make a pool to store anything on
The specs for the computer I'm trying to use
Studio XPS 9100 Intel Core i7- 930 processor(8MB L2 Cache, 2. 80GHz)
Nvidia GeForce GTS450
8GB DDR3 SDRAM at 1333MHz
I did a fresh install of scale and when I try to create a pool there is no disk available to create the pool with. Only the boot drive shows up
when I type zpool status this is what I get
admin@truenas[~]$ sudo zpool status
We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:
#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.
[sudo] password for admin:
pool: boot-pool
state: ONLINE
status: Some supported and requested features are not enabled on the pool.
The pool can still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
config:
NAME STATE READ WRITE CKSUM
boot-pool ONLINE 0 0 0
sdd3 ONLINE 0 0 0
errors: No known data errors
when I type lsblk I get
admin@truenas[~]$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 3.6T 0 disk
sdb 8:16 0 3.6T 0 disk
sdc 8:32 0 931.5G 0 disk
sdd 8:48 0 931.5G 0 disk
├─sdd1 8:49 0 1M 0 part
├─sdd2 8:50 0 512M 0 part
├─sdd3 8:51 0 915G 0 part
└─sdd4 8:52 0 16G 0 part
└─sdd4 253:0 0 16G 0 crypt [SWAP]
I don't know how to make the drives show in storage dashboard I was able to import and get this but I still can't make a pool to store anything on