terry5008
Cadet
- Joined
- Sep 16, 2023
- Messages
- 9
I've noticed that the Bluefin docs discuss over-provisioning using the disk_resize shell command, but the Cobia docs talk about using the CLI command storage disk resize. Yet, the Cobia CLI commands seem to be available in Bluefin. But when the Cobia commands are executed in Bluefin, they run but produce no visible results.
Is the disk resize in the Bluefin CLI a Cobia feature that has no code behind it in Bluefin? Just curious.
Is the disk resize in the Bluefin CLI a Cobia feature that has no code behind it in Bluefin? Just curious.
AMD EPYC 7502
Supermicro H12SSL-NT motherboard
256GB ECC RAM
SUPERMICRO AOC-S3008L-L8E HBA in IT mode (MB slot #3)
Proxmox 8.0.4
4 2TB Seagate Ironwolf Pro HDDs in a striped mirrored set
2 Kingston 480GB DC600M SSDs mirrored & overprovisioned for SLOG
TrueNAS Test Bed
TrueNAS-SCALE-22.12.3.3 on PVE VM
Allocated 16GB RAM
32GB virtual disk for boot
The AOC-S3008L is passed through to this VM
4 old decommissioned Samsung HDDs connected to AOC-S3008L
3 Samsung PM893 2.5" 960GB SSDs connected to AOC-S3008L
Supermicro H12SSL-NT motherboard
256GB ECC RAM
SUPERMICRO AOC-S3008L-L8E HBA in IT mode (MB slot #3)
Proxmox 8.0.4
4 2TB Seagate Ironwolf Pro HDDs in a striped mirrored set
2 Kingston 480GB DC600M SSDs mirrored & overprovisioned for SLOG
TrueNAS Test Bed
TrueNAS-SCALE-22.12.3.3 on PVE VM
Allocated 16GB RAM
32GB virtual disk for boot
The AOC-S3008L is passed through to this VM
4 old decommissioned Samsung HDDs connected to AOC-S3008L
3 Samsung PM893 2.5" 960GB SSDs connected to AOC-S3008L