ccdanieldb
Dabbler
- Joined
- Oct 26, 2016
- Messages
- 29
I have a question about the startup procedure for the super micro X9DRD-7LN4F-JBOD. I got a Server form the TheServerStore.com and hooked it up last night but I was unable to get it to post.
The specs are below. I connected two power cables, a VGA monitor, Dell keyboard and two 8GB USB drives (one with the FreeNAS installer, and the second for FreeNAS to be installed on). After power is connected I get a green flashing led at the back of the motherboard, the solid led’s at the back of the power supplies and no other led’s light up. I pressed the power button at the front of the box and nothing happens. I tried holding down the power button with no effect.
The manual seems to call for taking out the ram and if that does not work taking out the CPU’s until I get error codes from the speaker. Before I start doing that I wanted to see if I am missing a startup step.
Any help would be great.
Respectfully
Daniel
Specs:
Supermicro 36 Bay 4U JBOD / FREENAS Ready Server W/ X9DRD-7LN4F-JBOD
View/Hide options
Processors: DUAL INTEL XEON PROCESSOR E5-2650 V2 EIGHT CORE 20M CACHE 2.6GHz
Memory: 128GB MEMORY (8x 16GB) DDR-3 ECC REG
Raid Controller (1): 1x LSI MR SAS 9261-8i SAS/SATA 6Gbps PCIe RAID Controller Installed
Raid Controller (2): 1x AOC-S2308L-L8E PCI-E 8-PORTS SAS/SATA 6G RAID CONTROLLER Installed
PCIe Network Card: AOC-STGN-i2S SUPERMICRO REV 2.0 DUAL PORT 10 GIGABIT ETHERNET CARD
Power Supply: 2x PWS-920P-1R
The specs are below. I connected two power cables, a VGA monitor, Dell keyboard and two 8GB USB drives (one with the FreeNAS installer, and the second for FreeNAS to be installed on). After power is connected I get a green flashing led at the back of the motherboard, the solid led’s at the back of the power supplies and no other led’s light up. I pressed the power button at the front of the box and nothing happens. I tried holding down the power button with no effect.
The manual seems to call for taking out the ram and if that does not work taking out the CPU’s until I get error codes from the speaker. Before I start doing that I wanted to see if I am missing a startup step.
Any help would be great.
Respectfully
Daniel
Specs:
Supermicro 36 Bay 4U JBOD / FREENAS Ready Server W/ X9DRD-7LN4F-JBOD
View/Hide options
Processors: DUAL INTEL XEON PROCESSOR E5-2650 V2 EIGHT CORE 20M CACHE 2.6GHz
Memory: 128GB MEMORY (8x 16GB) DDR-3 ECC REG
Raid Controller (1): 1x LSI MR SAS 9261-8i SAS/SATA 6Gbps PCIe RAID Controller Installed
Raid Controller (2): 1x AOC-S2308L-L8E PCI-E 8-PORTS SAS/SATA 6G RAID CONTROLLER Installed
PCIe Network Card: AOC-STGN-i2S SUPERMICRO REV 2.0 DUAL PORT 10 GIGABIT ETHERNET CARD
Power Supply: 2x PWS-920P-1R