michael1947
Cadet
- Joined
- Dec 3, 2020
- Messages
- 2
Hardware: Motherboard-Asrock Steel Legend B550M, CPU-Ryzen3600, Memory 2xKingston 16GB ECC, Hard drives-8xSeagate Ironwolf 4TB Z2 config. (test drives 4xSeagate RE4 2TB)
Boot drive: Sandisk Plus 240GB, HD controller LSI 9211 IT mode, NICs Mellanox connectx3.
Hello, any help on following gratefully received.
I am attempting to move my FreeNAS 11.3 Supermicro Xeon L5640 8 drive rack system (working well for years) to Supermicro tower TrueNAS 12.0 Release, Ryzen 3600, to reduce power bills.
Progress so far:
1. I upgraded SM sytem to TrueNAS 12.0 Only problem seemed to be loss of dashboard.
2. Fresh install of TrueNAS to Ryzen SSD.
3. I installed a 4 drive test system (Bays 1-4) into Ryzen server. All drives active, all appeared to be working correctly including dashboard.
4. Having tested system, create new fresh install for drives from old system.
5. Save config on SM rack system.
6. Transfer drives from rack to Ryzen.
7. Import pool to Ryzen.
8. Pool shows degraded, drive bays 2 & 4 UNAVAIL, unable to offline or replace.
9. Installed config file and lost dashboard.
10. Both systems using LSI 8 way card in IT mode. Swapped cards/cables, no change.
11.Swapped 1 affected drive for new replacement, no change.
12. Shut down, removed all drives, reinstalled Fresh TrueNAs, created new test pool test drives, using bays 2,3,4. No other changes.
13. All working normally. Out of ideas!
I've tried several Google searches with no luck.
I am considering starting fresh, copying from backups, but I would lose some archived ISCSI stuff so would prefer not to.
Any help appreciated. Thankyou.
Michael1947
Boot drive: Sandisk Plus 240GB, HD controller LSI 9211 IT mode, NICs Mellanox connectx3.
Hello, any help on following gratefully received.
I am attempting to move my FreeNAS 11.3 Supermicro Xeon L5640 8 drive rack system (working well for years) to Supermicro tower TrueNAS 12.0 Release, Ryzen 3600, to reduce power bills.
Progress so far:
1. I upgraded SM sytem to TrueNAS 12.0 Only problem seemed to be loss of dashboard.
2. Fresh install of TrueNAS to Ryzen SSD.
3. I installed a 4 drive test system (Bays 1-4) into Ryzen server. All drives active, all appeared to be working correctly including dashboard.
4. Having tested system, create new fresh install for drives from old system.
5. Save config on SM rack system.
6. Transfer drives from rack to Ryzen.
7. Import pool to Ryzen.
8. Pool shows degraded, drive bays 2 & 4 UNAVAIL, unable to offline or replace.
9. Installed config file and lost dashboard.
10. Both systems using LSI 8 way card in IT mode. Swapped cards/cables, no change.
11.Swapped 1 affected drive for new replacement, no change.
12. Shut down, removed all drives, reinstalled Fresh TrueNAs, created new test pool test drives, using bays 2,3,4. No other changes.
13. All working normally. Out of ideas!
I've tried several Google searches with no luck.
I am considering starting fresh, copying from backups, but I would lose some archived ISCSI stuff so would prefer not to.
Any help appreciated. Thankyou.
Michael1947