MainCranium
Cadet
- Joined
- Dec 20, 2023
- Messages
- 4
After upgrading from 23.10.0 to 23.10.1, I'm experiencing the following behavior:
Upon startup, Applications fail to load, and I receive this error:
I'm able to get around this issue once the server is operational by toggling "Enable GPU support" off and on again in the Advanced Settings of the Apps page. It seems that this forces the service to restart and successfully lookup the now-initialized bridge interface.
Has anyone else experienced this? Do we know if the bridge interface is still necessary to get around this old issue I'm referring to? (Here's a related forum post. The original article I referenced about it at the time is no longer available.) I'm wondering how best to proceed here.
Upon startup, Applications fail to load, and I receive this error:
- Failed to configure kubernetes cluster for Applications: Unable to lookup configured interfaces: br01
I'm able to get around this issue once the server is operational by toggling "Enable GPU support" off and on again in the Advanced Settings of the Apps page. It seems that this forces the service to restart and successfully lookup the now-initialized bridge interface.
Has anyone else experienced this? Do we know if the bridge interface is still necessary to get around this old issue I'm referring to? (Here's a related forum post. The original article I referenced about it at the time is no longer available.) I'm wondering how best to proceed here.