brian.ward
Cadet
- Joined
- Feb 5, 2020
- Messages
- 4
I have tried disabling C states, using Legacy and UEFI bios options.
This board does not have a BIOS with CSM option.
Upon pressing 1 or Enter on the boot loader screen of either an installed FreeNAS installation, or the install media, will continue without issue.
I can confirm this is the exact same result regardless of configuring for BIOS or UEFI.
Once booted into FreeNAS, everything works perfectly. All drives are showing up and able to be configured.
Is there a boot parameter that I can use in order to work around this?
Hardware:
GIGABYTE [R272-Z32 (rev. 100)]
BIOS = R10
BMC = 12.04.1
Firmware is the latest version as of 2/5/2020
OS Installed on Mirror (2 x Samsung 860 PRO 512GB)
AMD EPYC 7232P processor
128GB RAM (DDR4 3200)
This board does not have a BIOS with CSM option.
Upon pressing 1 or Enter on the boot loader screen of either an installed FreeNAS installation, or the install media, will continue without issue.
I can confirm this is the exact same result regardless of configuring for BIOS or UEFI.
Once booted into FreeNAS, everything works perfectly. All drives are showing up and able to be configured.
Is there a boot parameter that I can use in order to work around this?
Hardware:
GIGABYTE [R272-Z32 (rev. 100)]
BIOS = R10
BMC = 12.04.1
Firmware is the latest version as of 2/5/2020
OS Installed on Mirror (2 x Samsung 860 PRO 512GB)
AMD EPYC 7232P processor
128GB RAM (DDR4 3200)