John's has
Cadet
- Joined
- Oct 5, 2016
- Messages
- 9
One of my drives keeps going offline, then back online with resilvering every few minutes. Because this cycle happens so quickly (re-silver only takes a few seconds to minutes at which time the alert gets cleared) every time I check the pool status, the disks are all online with no errors. Smart reports for all drives report no errors. How can I tell which drive is the Disk referred to in the alert message once the alert has been cleared? In this case Disk 13506793685844539047. Thanks!
The following alert has been cleared:
* Pool FreeNAS2 state is ONLINE: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state.
Current alerts:
* Pool FreeNAS2 state is DEGRADED: One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state.
The following devices are not healthy:
The following alert has been cleared:
* Pool FreeNAS2 state is ONLINE: One or more devices is currently being resilvered. The pool will continue to function, possibly in a degraded state.
Current alerts:
* Pool FreeNAS2 state is DEGRADED: One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state.
The following devices are not healthy:
- Disk 13506793685844539047 is REMOVED