Sorry for bringing up an old thread, but trying to get this working and having some difficulty. I have a QLE 2562 based card in my server with 4 8G ports. I'm using ESXI and passing just one of the ports to a TrueNAS
Most of the output on TrueNAS seems okay and I believe the SAN switches are setup correctly, but I can't see the LUN I've created on another ESX host connected via FCoE.
ctlfe_onoffline: isp0 current WWNN 0x20000024ff780ec0
ctlfe_onoffline: isp0 current WWPN 0x21000024ff780ec0
ctlfe_onoffline: isp0 (path id 3) target role enable succeeded
root@truenas[~]# ctladm portlist -i
Port Online Frontend Name pp vp
0 NO camsim camsim 0 0 naa.5000000d8a27f701
Target: naa.5000000d8a27f700
1 YES ioctl ioctl 0 0
2 YES tpc tpc 0 0
3 YES camtgt isp0 0 0 naa.21000024ff780ec0
Target: naa.20000024ff780ec0
4 YES iscsi iscsi 1 1 iqn.2005-10.org.freenas.ctl:ronfc,t,0x0001
Target: iqn.2005-10.org.freenas.ctl:ronfc
root@truenas[~]# ctladm portlist -l
Port Online Frontend Name pp vp
0 NO camsim camsim 0 0 naa.5000000d8a27f701
All LUNs mapped
1 YES ioctl ioctl 0 0
All LUNs mapped
2 YES tpc tpc 0 0
All LUNs mapped
3 YES camtgt isp0 0 0 naa.21000024ff780ec0
All LUNs mapped
4 YES iscsi iscsi 1 1 iqn.2005-10.org.freenas.ctl:ronfc,t,0x0001
No LUNs mapped
I noticed on the SAN switch (Cisco MDS) the port shows up like this, but thought it would be scsi-fcp:target?
0x790000 N 21:00:00:24:ff:78:0e:c3 (Qlogic) scsi-fcp:init
I can't seem to get into the QLogic BIOS on this UCS server to check any potential settings there.
Any help is appreciated.