vgusev2007
Dabbler
- Joined
- May 4, 2016
- Messages
- 11
Dear all, I use
Version:
TrueNAS-13.0-U6.1
And I have network switch HP 1910-8 JG536A (and I have the same problem with the same model like 1920 and so on)
When I change any network settings in TrueNAS or start a jail the switch is reboot for 1 second (it disconnects users from all ports too!).
It looks like this one for every port of the switch (please look at the picture below my post).
Ethernet1/0/1 link status is DOWN.
Ethernet1/0/1 link status is UP.
What the problem? I use only one network adapter with one ip, no VLAN etc.
I'm shocked! I use supermicro server platform with 2 CPU Intel(R) Xeon(R) CPU X5667 @ 3.07GHz
I don't have such problem when I use proxmox on this hardware.
dmesg output is:
igb0: link state changed to DOWN
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI>
Security policy loaded: MAC/ntpd (mac_ntpd)
igb0: link state changed to UP
bridge0: Ethernet address: 58:9c:fc:10:ff:bd
epair0a: Ethernet address: 02:e4:7a:c8:6b:0a
epair0b: Ethernet address: 02:e4:7a:c8:6b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: changing name to 'vnet0.1'
igb0: link state changed to DOWN
bridge0: link state changed to UP
igb0: promiscuous mode enabled
vnet0.1: promiscuous mode enabled
lo0: link state changed to UP
igb0: link state changed to UP
vnet0.1: link state changed to DOWN
epair0b: link state changed to DOWN
igb0: link state changed to DOWN
igb0: link state changed to UP
Best regards,
Viktor.
Version:
TrueNAS-13.0-U6.1
And I have network switch HP 1910-8 JG536A (and I have the same problem with the same model like 1920 and so on)
When I change any network settings in TrueNAS or start a jail the switch is reboot for 1 second (it disconnects users from all ports too!).
It looks like this one for every port of the switch (please look at the picture below my post).
Ethernet1/0/1 link status is DOWN.
Ethernet1/0/1 link status is UP.
What the problem? I use only one network adapter with one ip, no VLAN etc.
I'm shocked! I use supermicro server platform with 2 CPU Intel(R) Xeon(R) CPU X5667 @ 3.07GHz
I don't have such problem when I use proxmox on this hardware.
dmesg output is:
igb0: link state changed to DOWN
hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI>
Security policy loaded: MAC/ntpd (mac_ntpd)
igb0: link state changed to UP
bridge0: Ethernet address: 58:9c:fc:10:ff:bd
epair0a: Ethernet address: 02:e4:7a:c8:6b:0a
epair0b: Ethernet address: 02:e4:7a:c8:6b:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: changing name to 'vnet0.1'
igb0: link state changed to DOWN
bridge0: link state changed to UP
igb0: promiscuous mode enabled
vnet0.1: promiscuous mode enabled
lo0: link state changed to UP
igb0: link state changed to UP
vnet0.1: link state changed to DOWN
epair0b: link state changed to DOWN
igb0: link state changed to DOWN
igb0: link state changed to UP
Best regards,
Viktor.
Attachments
Last edited: